At SpecialEyes, our highest priority is helping you obtain successful patient outcomes. As you probably know, the leading cause of contact lens dropout is discomfort. (1) While our material is known for its biocompatibility and excellent water retention, comfort issues may still occur. Let’s take a look at some of the underlying causes of discomfort and best practices for troubleshooting these issues.
Due to the variety of potential causes, comfort issues can be difficult to troubleshoot. As you fit the lens on your patient’s eye, it’s important to think about the variables that could cause discomfort for your patient. Common reasons for discomfort are:
Contact lenses interact with some of the most sensitive areas of the body, such as the cornea, lid margin, and conjunctiva. Because of this, the eye can detect the presence of the contact lens. If your patient is new to wearing lenses or hasn’t worn contacts in a long time, it is possible they will mistake lens awareness for discomfort. Upon initial insertion, it is not uncommon for some patients to report a minimal amount of lens discomfort. However, this feeling should subside within the first few minutes of wear time as the eye becomes accustomed to the lens. One way to help minimize or eliminate this initial lens awareness is to rinse the lenses with a multipurpose solution prior to insertion and make sure the patient does not have the lens everted. SpecialEyes contact lenses are shipped in vials filled with a sterile, buffered saline solution. Although this solution is safe for an ocular environment, it can sometimes cause initial irritation, foreign-body sensations, or burning. If the patient still reports discomfort after taking this precaution, you should suspect that the lens is too flat, too thick, or has a torn edge.
Tight lenses tend to feel comfortable upon initial insertion; however, they can lead to discomfort after multiple hours of wear time. Since tight lenses do not move much on the eye, tear exchange is often poor, which can result in lens dehydration. When this happens, patients may report that their eyes feel itchy or dry; and in most cases, they will experience reduced visual acuity as the day goes on. Upon follow-up, you may even observe scleral indentation or conjunctival drag. (2) Conjunctival drag means that the lens is so tight that it pulls the conjunctival membrane during the blink or push-up test, causing irritation and redness. When this occurs, you can correct the problem by changing the base curve and/or diameter to improve the fit.
Patients with chronic dry eyes are unable to produce enough tears to keep their eyes moist. This dryness can be caused by a medical condition, certain medications, or acquired through risk factors like smoking, computer use, caffeine, etc. With over 4.88 million people in the U.S. suffering from chronic dry eyes (3) and nearly 45 million contact lens wearers nationwide (4), you’re likely to run into a patient with this problem. If your patient experiences discomfort from chronic dryness in a lens with low wettability, you may want to consider a lens with a higher permeability (Dk). For example, SpecialEyes 59% material has a Dk of 24, which helps keep our patients with chronic dry eyes happy and comfortable.
According to the Centers for Disease Control and Prevention (CDC), 40% to 90% of contact-lens wearers do not follow proper lens-care instructions given by their practitioner. (5) Non-compliance goes beyond not cleaning and disinfecting the lenses; other examples include wearing lenses beyond their replacement schedule, sleeping in daily-wear lenses, improper use of solutions and care products, and switching care regimens without speaking to an eye-care provider. When contact lenses are not properly cared for, patients can experience discomfort and reduced vision, and may face potentially damaging adverse reactions.
Here are some tips you can share with patients to promote healthy lens-care habits; you may want to provide them with a printed copy as a take-home checklist:
The following questions can help you pinpoint what may be causing your patient’s contact lens discomfort:
Once you have answers to the above questions, be sure to evaluate the lens fit for good centration, movement, and limbal coverage. Note any issues with corneal health or ocular pathology. Then, contact the SpecialEyes consultation department. Our consultants are experts in making lens adjustments to ensure your patient has crisp vision and a comfortable lens wear experience.
(1) “Discomfort: Leading Cause of Contact Lens Dropouts”; Review of Optometric Business; December 10, 2012. https://www.reviewob.com/discomfort-leading-cause-of-contact-lens-dropouts/
(2) Yanoff, Myron, Jay S. Duker, and James J. Augsburger. Ophthalmology; Edinburgh: Mosby Elsevier; 2009. http://www.clinicalkey.com/dura/browse/bookChapter/3-s2.0-B9780323043328X00017
(3) American Academy of Ophthalmology. “Eye Health Statistics: Eye Diseases”; accessed August 7, 2020. https://www.aao.org/newsroom/eye-health-statistics#eyediseases
(4) Cope, Jennifer R., Sarah A. Collier, et al. “Risk Behaviors for Contact Lens–Related Eye Infections Among Adults and Adolescents — United States, 2016”; Morbidity and Mortality Weekly Report (MMWR); August 18, 2017. https://www.cdc.gov/mmwr/volumes/66/wr/mm6632a2.htm
(5) Bui, Thai H., H. Dwight Cavanagh, and Danielle M. Robertson. “Patient Compliance During Contact Lens Wear: Perceptions, Awareness, and Behavior”; Eye Contact Lens; vol. 36, 6; 2010; pgs. 334–339. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3148150/
(6) Cope, Jennifer R., Nuadum Muriel Konne, et al. “Corneal Infections Associated with Sleeping in Contact Lenses — Six Cases”; Morbidity and Mortality Weekly Report (MMWR); August 17, 2018. https://www.cdc.gov/mmwr/volumes/67/wr/mm6732a2.htm